7 Comments

Summary:

Morgan Solar, a concentrating photovoltaic (CPV) startup, is raising a B round of $20-25 million and hopes to complete the fundraising by as early as April, Nicolas Morgan, vice president of business development at the company, told us.

Morgan Solar at Solar Power International 2010

Morgan Solar at Solar Power International 2010

Morgan Solar, a concentrating photovoltaic (CPV) startup, is raising a B round of between $20-25 million and hopes to complete the fundraising by as early as April, Nicolas Morgan, VP of business development at the company, told us.

The funding will help the Canadian company start a new factory in California to produce the optics for its CPV panels. Morgan Solar, founded in 2007, hopes to start production by the middle of this year, and the factory is set to have 5.5 MW of annual capacity.

The company previously raised $9.2 million in private capital and $10.3 million from the Canadian and U.S. governments. Its investors include energy giant Iberdrola and maker of factory equipment for plastic products, Nypro.

CPV technology uses mirrors and lenses to concentrate light onto solar cells to produce electricity. The concentration makes it possible to use smaller solar cells and save money. A typical CPV system is made up of one panel containing many lenses and corresponding solar cells. The panel, which is much larger than the solar panels you see on your neighbor’s rooftop, sits on a tracker that trains the panel to follow the sun’s movement throughout the day.

CPV developers, like some solar thin-film companies, still have to prove their products work as promised and attract project developers and financiers. CPV technology made a lot of sense several years ago when solar cells were very expensive, but the prices have declined significantly since then.

The struggles of Soliant Energy highlights those challenges. Los Angeles-based Soliant has laid off most of its employees after it couldn’t raise the money to build a 40 MW factory, reported Greentech Media. Unlike other CPV developers, Soliant was working on a CPV system for commercial rooftops. The concept was interesting and caught our attention during Solar Power International last October.

Morgan Solar’s system is ground-mounted, and the company set out to develop slimmer panels. The company slimmed down the panels by doing something different from other CPV technologies, getting rid of the focal distance between the lenses and the cells. The optics may look like Fresnel lenses but they aren’t, Morgan said. Thinner design requires less material, weighs less and presumably costs less to install.

The 3-square-meter panel can concentrate the sun up to 1,000 times and can convert 25 percent of the sunlight into electricity, Morgan said. Other CPV companies, such as SolFocus and Amonix, have developed much larger solar panels, which the companies say lead to more efficient use of land and trackers.

Morgan Solar currently has a panel assembly line at its headquarters in Toronto. The California factory, in the city of Chula Vista, will be critical for the company to move into commercial production. Morgan Solar previously talked about setting up a manufacturing operation with 35MW of capacity in 2011. The plan is to start with 5.5MW and move to 50MW after, Morgan said. A 50MW factory would cost about $13 million to build.

Morgan Solar is planning a 200 KW demonstration system in Lancaster, Calif., this year. The system will power a water pump that irrigates the nearby soccer field and be available for show-and-tell tours, Morgan said. Ground breaking is set to take place in the next few months. The company hopes to raise money to finance 16 MW of projects as well, Morgan said.

Related Content From GigaOM Pro (subscription required):

You're subscribed! If you like, you can update your settings

  1. Morgan Solar?
    You have GOT to be kidding!!
    Just another CPV scam….
    “We have got a new CPV thingie”
    It is going to make elecTRICKYty much cheaper than old fashioned “flatties”
    It uses a clever new principle which is very secret and you wouldn’t understand it.
    Just hand over the loot and we will carry on pharting around with our CPV thingie for a while.
    We might need more MUNNY in a few months.
    Be sure to keep it coming (suckers).
    WHOOO HOOO!!!

    Share
  2. Keef Wivanef,

    What are you smoking? Have you even looked into the company’s technology? Get over yourself — educate yourself before making stupid comments.

    Share
  3. Yes indeed I have looked into their technology.
    NOTHING new about it.
    Same old CPV bullshit, use a lens, mirrors, light guide or whatever to concentrate the sun onto a small area of 3j cell.
    Sounds easy.
    Problem is you absolutely MUST have a tracker.
    You have to overcome heat issues.
    You HAVE to do all of that at cost below $1 Watt to compete with perfectly respectable and well proven flat panels.
    CAN’T BE DONE!!
    And that is why NOBODY has ever put one on sale.
    All they have is very secret pilot trials (using other peoples money) and a constant stream of excuses for why they need even MORE time and MORE money.
    Loot goes down executives trousers.
    CPV widget NEVER comes on the market.
    Go ahead …prove me wrong…
    See more of the argument here http://www.dkasolarcentre.com.au/forum/viewtopic.php?f=3&t=23

    Share
  4. “CPV technology uses mirrors and lenses to concentrate light onto solar cells to produce electricity.”

    Yes, but it uses SMOKE AND MIRRORS to convince mug investors (or mug fund managers) to give them money for their ridiculous “coming real soon” CPV widgets.

    http://www.marsdd.com/videos/entries/meet-the-entrepreneurs-morgan-solar
    WHAT UTTER BULLSHIT!!!

    Share
  5. http://lh6.ggpht.com/_9mSBhL6XAZY/SupcFWBa3wI/AAAAAAAAEko/ytm1x4gRYto/SPI09IMG_5494.JPG

    SunSimba High Concentration Photovoltaic Panel
    Blah Blah
    Will be priced competitivly against thin film panels but will deliver three times greater efficiency. (oh really?)
    Will advice price, shipping dates and other details in 2010
    YEAH RIGHT!!
    Tracking Requirements
    DUAL AXIS

    And how much will a decent 2 axis tracker cost dudes?

    Dream on!!

    Share
  6. This is a wonderful advancement, reducing the amount of space required to harvest the suns energy.

    I have often wondered, hasn’t Mother Nature already given us the the perfect design for solar collectors? How many square feet of surface area are on the leaves of a 30 year old oak tree? Also, it doesn’t matter which direction the sun is, you are capturing its energy.

    Share
  7. Keef Wivanef Friday, March 4, 2011

    Oh terrific!
    A naive greenie.
    Be sure to give Morgan Solar a donation.
    I’m sure John Paul Morgan could use the money.
    Poor bugger can’t afford a razor!
    http://www.flickr.com/photos/26481968@N05/2611255033/

    Share

Comments have been disabled for this post